Profile size 40" x 40
Maximum drill diameter 1-9/16" @ 100% duty cycle
2" at reduced production
Material thickness
Limited only by drill length and through-the-tool coolant system
1-1/4" with external spray mist coolant system
Maximum speed X axis 120 ft per minute
Maximum speed Y axis 120 ft per minute
Spindle motor 13.5 HP, dual-range hydraulic motor
Spindle speeds 200 - 850 rpm, continuously variable
Drilling feed rate 2" - 10" per minute, continuously variable
Maximum spindle stroke 13"
Vise clamping power 5 tons maximum (adjustable)
Power supply 460 Volt 3 Phase, 60 Hz
The Ocean Avenger can be installed in any structural steel fabrication shop or
other operation where layout and drilling is required. It is capable of
drilling most steel profiles including:
Beams up to 40" high (rolled or fabricated)
Angles, channels and T sections
Flat bars
Plates up to 40" wide
Girders
Tapered beams or other unequal sections
Tubes
Rails
Truck frames, rail car frames, etc.
Main Characteristics of the Ocean AVENGER:
Eliminates manual layout and drilling
Provides exceptional accuracy of hole placement, eliminating costly field
modifications
Easy installation in one-half the floor psace required by regular beam lines
Simple and easy to operate
No computer experience required
Fully automatic drilling cycle
Concept of the Beam Line
Fixed Machine Bed
Mobile Drilling Unit
Web Sensor System
Hydraulic System
Siemens 2 Axis 840D Numerical Control
Introduction - Data Storing
Axis Control
Pentium PC
Machining Cycle
IMPORTANT NOTICE TO PROTENTIONAL CUSTOMERS:
Foundations and civil engineering must be done by the customer in advance of
arrival of machine. It is recommened by the factory the machine be placed on
a clean level 6" thick concrete floor. You will need dry shop compressed air
(90 - 100 psi - 20 CFM); network cable to the machine s operating console for
direct importation of drawings from the clients project server; analog
telephone line run to the machines operating console for remote diagnostic
capability; hydraulic fluid; anchor bolts; levels, transit and miscellaneous
tools.
